1. Reinforcement cords for Polyester industrial belt
A. Reinforced cords for high-power driving belt
This type of reinforced cords is made of high-end Aramid fiber with composite carbon gel and polyester finish. it has higher tensile strength, deformation resistance and wear resistance. Its comprehensive performance (especially for its service life) is much higher than that of high performance steel cord.
Application：
High tension driving belt
Anti-corrosion driving belt
Wear resistance driving belt
Strong anti-impact driving belt
Properties：
Tensile strength：＞1500N/mm2
Bending (D/d=40，load：1/12 of BF）：＞10 million times
Elongation at break：≤3.6%
Type： SKU
This type of reinforced cords is made of high-end aramid fiber and carbon fiber, with polyester and carbonate treatment. It has good performance in bending resistance, electrical conductivity and aging resistance. It can be used to replace high quality steel wire on the market. Its service life (especially for anti-fatigue performance) is 2-3 times higher than that of high quality steel wire.
Application：
Industrial belt to be monitored (e.g. elevator belts)
High frequency Industrial belt
（e.g. belts for mining）
High vibration industrial belt
（e.g. cold rolling mill belt）
Properties：
Tensile strength：＞1500N/mm2
Bendings（D/d=40，load：1/12 of BF）：＞15 million times
Elongation at break：2.8%-3.8%
B. Reinforced cords for polyester belts in electronics, robotics, food and other fields
Type: AWE
This type of reinforced cords is made of Tejin aramid fiber by one physical treatment and three chemical surface treatment. The results showed that this cords have higher breaking force and better bending performance. Compared with traditional reinforced cords, the bonding property and bending performance of the cords are obviously improved.
Application：
Polyester belt
C. Reinforced cords to replace steel cords
Type: CPK
This type of reinforced cords is made of high-quality aramid fiber with its surface treated by agents three times, then twisted and compacted. This cords have high breaking force and bending performance, good wear resistance, and its comprehensive performance is better than that of steel wire. If the design is reasonable, the production cost of the belt can be greatly reduced, in the mean time, the service life of the belt can be improved.
Application:
Reinforced cords to replace steel cords for industrial belt
This type of reinforced cords is made of high-quality aramid fiber with its surface treated by agents three times, then twisted and compacted. This cords have high breaking force and bending performance, good wear resistance, and its comprehensive performance is better than that of steel wire. If the design is reasonable, the production cost of the belt can be greatly reduced, in the mean time, the service life of the belt can be improved.
Application:
Reinforced cords to replace steel cords for industrial belt
2. Reinforcement cords for rubber belts
Type: SPA
This type of cords are made of international high-end Aramid fiber by German professional equipment via Swiss technology, through strengthening the adhesion between Aramid material and chloroprene rubber, the cords can be tightly embedded in the rubber to make them into one. These reinforced cords have high tensile strength, good bending and anti-impact performance , wear resistance. Their comprehensive performance (especially for service life) is much higher than the high-performance steel wire and other types of aramid cords made by others, it is especially favored by local and international well-known agricultural machinery manufacturers.
Application:
High strength and anti-impact driving belt
Anti-corrosion driving belt
Driving belt for small diameter pulley
Accurate and stable driving belt
This type of cords are made of international high-end Aramid fiber by German professional equipment via Swiss technology, through strengthening the adhesion between Aramid material and chloroprene rubber, the cords can be tightly embedded in the rubber to make them into one. These reinforced cords have high tensile strength, good bending and anti-impact performance , wear resistance. Their comprehensive performance (especially for service life) is much higher than the high-performance steel wire and other types of aramid cords made by others, it is especially favored by local and international well-known agricultural machinery manufacturers.
Application:
High strength and anti-impact driving belt
Anti-corrosion driving belt
Driving belt for small diameter pulley
Accurate and stable driving belt
Type: HPA
This type of cords are made of international high-end aramid fiber by German professional equipment via Swiss technology. Through strengthening the adhesion between aramid material and outer covering material (such as chloroprene rubber, EPDM, etc), the cords structure are more compacted, so that the dimensional stability of the belt can be guaranteed , in the mean time, the load capacity can be greatly improved, and high performance, high-power transmission can be assured. These reinforced cords are widely used in V-belts, timing belts and ribbed V- belts.
Applications：
Industrial belt with good dimensional stability
High load driving belt
High power driving belt
This type of cords are made of international high-end aramid fiber by German professional equipment via Swiss technology. Through strengthening the adhesion between aramid material and outer covering material (such as chloroprene rubber, EPDM, etc), the cords structure are more compacted, so that the dimensional stability of the belt can be guaranteed , in the mean time, the load capacity can be greatly improved, and high performance, high-power transmission can be assured. These reinforced cords are widely used in V-belts, timing belts and ribbed V- belts.
Applications：
Industrial belt with good dimensional stability
High load driving belt
High power driving belt
